欧美一区二区三区激情-欧美一区二区三区激情视频-欧美一区二区三区久久久-欧美一区二区三区久久综-欧美一区二区三区久久综合-欧美一区二区三区免费不卡

News

How complex is the manufacturing process of precision moulds?

168 Pengle precision 2022-10-21

Precision die making
From the signing of precision mold manufacturing orders to the delivery of qualified mold to customers every link may affect the quality of the mold, precision mold manufacturing process according to the system engineering control, every link must be controlled, is the premise of precision mold manufacturing.

The guiding principle of mold parts processing is to make corresponding process plans for different mold parts, different materials, different shapes and different technical requirements. The general technological process of mold parts is: blank preparation - rough machining - semi-finishing machining - heat treatment (quenching and tempering) - precision grinding - electrical machining - fitter finishing and surface machining. Through the control of each process, the required machining accuracy is achieved.

1. Materials and heat treatment control

Mould parts heat treatment to make parts needed to get the material hardness at the same time, and to make the parts after machining process and stable size shape, according to the characteristics of different parts of materials and parts structure has different way of heat treatment, must to control stress in heat treatment of parts to make heat treatment process, we must give full consideration to the material hardenability hardenability heat-sensitive and decarburization sensitivity, to adopt pressure quenching process of thin-walled parts.

(1) Selection of precision die materials: in addition to CrWMn, Cr12, 40Cr, GCr15, Cr12MoV and 9Mn2V hard alloy, alloy steel S2, S3, V10, APS23S1, G2, G3, G4 and G8 can be selected for some die and punch with high working strength and severe stress.



 
(2) to deal with the stress after quenching, quenching after the artifacts are kept stress, easy to cause the follow-up after finishing workpiece size change even cracking, so the parts should be hot after quenching tempering, eliminate the quenching stress on complex shape, inner and outer corner more artifacts, tempering is not sufficient to eliminate the quenching stress, still need to go before finishing annealing or aging treatment for many times, fully release the stress.

2. Edm control

(1) Preparation for wire cutting: Precision slow-moving wire cutting machine tool is selected for wire cutting, with processing precision ±0.001mm and roughness Ra=0.2um. The perpendicularity of deionized water wire cutting wire with high degree of deionization meets the requirements of processing precision. The material of wire used for proper tensioning force cutting is suitable for the material of the workpiece to be cut to ensure a reasonable processing speed.

(2) the processing route design: wire-cutting processing on the material of the original stress balance is destroyed in the process of machining, cause stress concentration around the corner, processing method of stress concentration, by using the principle of the vector translation, finish machining allowance for 0.8 ~ 0.9 mm, before rehearsals cavity rough shape, and then to heat treatment, machining stress release before finishing, as far as possible to ensure that the thermal stability. 4 times of cutting shall be adopted in the processing of punch. The cutting wire cutting position and path shall be reasonably determined and the clamping blank position shall be selected after the first feeding. The workpiece shall not be in the state of suspension after the first feeding, and the workpiece shall always be in a good stress state without affecting the subsequent processing. Perforating the blank and threading the wire, the processing effect is better than the shape cutting.

(3) EDM forming process: Rough and fine electrodes should be made in EDM forming process respectively. Fine electrode is machined by CNC CNC machine, cu-W alloy electrode has good comprehensive performance, and the electrode loss is very small compared with that of red copper. Under good chip removal conditions, it is difficult to process materials and parts with complex cross section shapes. Ag-w alloy electrode has better performance than Cu-W alloy electrode, which can be used in precision machining. Graphite electrode is made of imported graphite with small loss, high hardness, fast electric erosion and low surface roughness. Before the end of EDM, fine gauge finishing is arranged to remove the hardened thin layer formed on the surface.



 
Dongguan Pengle precision components Co., Ltd. is a mobile phone precision mold manufacturing, processing, manufacturers. Over the past 15 years, Pengle has continuously introduced advanced technology and equipment from Germany and Japan, established a unique standardized quality control center, recruited and trained talents who have been focusing on mobile phone board and mobile phone precision accessories for more than 10 years, optimized THE ISO management mode, and built a modular, transparent and modern factory with unique style in the industry.

久久精品国产亚洲av麻豆色欲 | 天堂中文最新版在线中文 | 精品无码一区二区三区亚洲桃色 | 久久这里只有精品首页 | 我要看a级毛片 | 98色花堂国产第一页 | 欧美人妻aⅴ中文字幕 | 四川丰满妇女毛片四川话 | 國产一二三内射在线看片 | 国产一区二区视频在线 | 亚洲av无码精品色午夜 | 色婷婷精品大在线视频 | 国产午夜三区视频在线 | 精品视频在线一区 | 国产麻豆一级在线观看 | 97se亚洲国产综合自在线 | 日本又黄又爽gif动态图 | 色哟哟最新在线观看入口 | 黄页网址免费观看18网站 | 国产精品原创巨作av女教师 | 亚洲精品中文字幕乱码三区 | 精精国产xxxx视频在线 | 国产无套内射普通话对白 | 人人妻人人玩人人澡人人爽 | 男男啪啪激烈高潮cc漫画免费 | 日欧一片内射va在线影院 | 国产口爆吞精在线视频 | av色欲无码人妻中文字幕 | 成年免费视频黄网站zxgk | 中文字幕一精品亚洲无线一区 | 久久久久久亚洲精品中文字幕 | 国产在线观看成人 | 好男人日本社区www 男女性爽大片视频 | 国产精品美女久久久久久久 | 欧美大肥婆大肥bbbbb | √新版天堂资源在线资源 | 天天躁夜夜躁狠狠躁2021 | 国产亚洲精品久久777777 | 欧美乱妇高清无乱码 | 999毛片免费观看 | 亚洲精品乱码久久久久久日本蜜臀 |